TEL: +0086-731-28332431,22273601Hand phone: 0086-13827804388

E_mail:manager@applecarbide.com; manager@applecarbide.cn

Home > Products > Grade List of Tungsten Carbide > Grade list of tungsten carbide

Grade list of tungsten carbide




INQUIRY NOW


类别
 
Type
牌号
Grade
 
粒度Grain Size   μm 钴含量Cobalt Content    (WT. %) 密度
Density
g/cm3
硬度
Hardness
HRA
强度
T.R.S
N/mm2
推荐用途
Recommended Application
国际标准
ISO code
 
 
 
Carbide Saw tips
UF01 submicron 3% 15 94 2500 MDF, HDF K01
UF05 submicron 5% 14.8 93 2600 MDF,Alumium, K05
UF10 extrafine 5% 15 92 2300 Hardwood ,Plastic-steel K10
UF15 fine 6% 14.9 91 2200 General wood,green wood , cast iron K10
Carbide Strips                
YG8A Medium 8% 14.8 90.5 2400 General wood , hardwood K20A
YG6 Medium 6% 15 91 2300 General wood K10
UF16H Fine 8% 14.7 91.2 2500 Hard wood K20
UF18H Submicron 10% 14.5 91.8 3200 Hard wood K30
UF07H Submicron 7% 14.7 92.9 3000 MDF , HDF K30
               
 
 
 
 
 
Solid Carbide
Slitting
Saw
YS2T  
submicron
10 14.5 92.0 2350 Fine grade alloy , with high wear resistance , high bending stength.Machining of refractory alloys, stainless steel and high manganese steel ,etc. YS2T
UF6A Fine 6 14.9 92.0 2000 Fine Grade alloy ,good wear resistance. Semi-finishing of chilled cast iron ,non-ferrors metals alloys ,semi-finishing and finishing of hardened steel, alloy steel . K10
YG8 Medium 8 14.7 89.5 2500  
High strength, impact and shock resistance higher than JR6A, but wear resistance and cutting speed comparatively lower, Roughing of cast irons, non-ferrous metals and their alloys as well as non metallic materials at low cutting speed .
K20
 
 
 
 
Carbide rods
UF12
 
submicron 12 14.05 92.5 4000 suitable for machining titanium alloys,heat-resistant alloys,stainless steel,hardened steel,grey cast iron ,glass fiber reinforced plastics,etc.It is recommended for making end mills and ball nose mills of various specification with a higher hardness and strength than UF10.2 K30-K40
UF06 submicron 6 14.90 93.5 3800 Suitable for machining composite materials,such as aluminum-magnesium alloys,rein-forced plastics,and carbon fiber,iron-based alloys,etc.It is recommened for making drills for machining aluminum-magnesium alloys. K05-K10
YL10.2
 
Extrafine 10 14.42 91.8 4000 Suitable for machining common steel ,cast iron,stainless steel,heat-resistant steel,nickel based alloys and titanium alloys, etc.It is recommended for making conventional tools,such as twist drills, end mills, screw taps, gun drills ,etc. K20-K30
UF50 Medium 15 14.00 87.6 4000 Suitable for making solid dies and moulds and tools for punching operations . K30-K40
YG10X Fine 10 14.43 91.5 2500 Suitable for machining common steel ,cast iron,stainless steel,heat-resistant steel,nickel based alloys and titanium alloys, etc. K20-K30

PRODUCTS NAME :
Your Name : *
Email : *
Message:
 


Live Chat

How can i help you ?

-

Contact us